0086-371-67660555 Email:sales@zxcrusher.com
cone crusher nerws banner

position: Home > News > Method to extend the life of cone crusher components

Method to extend the life of cone crusher components

Time:2018-03-07 09:43:33 10:10:46 AM Num:84

Cone crusher has good wear resistance, affordable, stable performance, etc., but we also need to pay special attention to daily use, such as improper operation can cause damage to the parts of the cone crusher, in this Jiaozuo Zhongxin Heavy Industry Engineer give you a few suggestions.

Cone crusher

1, to reduce the damage to the parts of cone crusher. When the crushing cavity serious iron, card can not be discharged under the crushing cavity, it will cause the cone crusher to stop running. The traditional treatment method is to first clean up the ore in the crushing chamber and cut the iron into small pieces by means of gas cutting. However, this process takes a long time and consumes a great deal of material. On the other hand, due to the small operation space, the operation is difficult and there are many unsafe factors. Therefore, the hydraulic cone crusher improved on this issue, when there are impurities in the crusher, the hydraulic system will automatically release the hydraulic cylinder oil so that the dynamic cone down, and then to the hydraulic cylinder to make the dynamic cone rise, through this The method moves the moving cone up and down, can discharge the impurity in the crushing cavity. This method does not require auxiliary tools, does not require manual operation, simple and convenient to handle, reducing the time spent.
2, to improve the cone crusher parts force status. The vertical component of the cone crusher production is mainly borne by the beam through the suspension device. Therefore, during actual use, the beam of the crusher will be cracked, the repair is difficult and the repair effect is not good and the use time is short. The hydraulic cone crusher installed in the lower part of the base of a hydraulic device, the hydraulic cylinder plunger on the support of the moving cone spindle. Therefore, the self-weight of dynamic cone and the vertical force of crushing ore are assumed by the hydraulic cylinder, which largely improves the force of the beam and prolongs the service life of the beam.
3, to improve the quality of cone crusher parts. The overall design of the key components of the traditional cone broken immature. With the conic crusher continue to large-scale, intelligent direction, the introduction of advanced hydraulic cone crusher crushing concepts and technology at home and abroad to improve the manufacturing process of component design and manufacturing quality. In addition, attention should also be paid in the production of parts maintenance work to reduce damage to parts.


Contact us