Pay attention to these points to increase the output of your sand making machine

What is the reason for the low output of the sand making machine? Obviously, the output is large, why is it getting less and less after using it for a short time? In actual production, the output of machine-made sand is related to many factors. For example: (material hardness, humidity, fineness of finished sand, maintenance and quality of the equipment itself, etc.) There are many factors that affect the output of the sand making machine.

Different finished sand fineness

The higher the fineness requirement, that is, the finer the material required to be sanded, the smaller the sand making capacity. Generally, it depends on the requirements of the ore dressing plant for fineness. If there are no special requirements, the fineness of the material is generally set to medium fine. The sand output and energy consumption of equipment with different sand making machine models are different during operation. Users need to purchase sand making machines of suitable models, otherwise it will affect the output of the equipment and the production may also cost more.

Whether it is operated in a standardized manner

Regular maintenance of the sand making machine and regular maintenance will also affect the sand output of the equipment. If a sand making machine is not operated properly and is not regularly maintained, it will cause the wear of the equipment's vulnerable parts to accelerate, *ly reduce the life of the equipment, and the production volume per unit time is small.

The quality of the sand making machine itself

A high-quality sand making machine is not only energy-saving and environmentally friendly, but also can easily achieve the expected output of the equipment. In addition, high-quality equipment manufacturers use new high-wear-resistant materials and relatively high-quality production technologies during production. The equipment produced can well meet the production needs of users and provide a more favorable guarantee for continuous, efficient and safe production. Whether the design of the sand making production line is appropriate or not is related to the output and all the equipment of the entire production line. For example, if your output requirement is 500t/h, you can't just require the sand making machine to reach 500t per hour. The processing capacity of the jaw crusher, cone crusher, belt conveyor, etc. in front must also match it, otherwise the output will definitely not be achieved.

In short, the configuration of a production line must *ly consider various factors to meet your production capacity requirements. When purchasing, you must *ly consider your own production situation. You can communicate with us, and we will send a * technical manager to communicate with you for your reference.