How to spend the running-in period of the sand making machine

Everyone knows that the machine needs a certain running-in period. The newly purchased machine equipment needs to be newly run-in during the processing and production process, and then it can be used in our production. Jiaozuo Zhongxin is here to talk about it as sand and gravel. There are some problems that need to be paid attention to during the running-in period of the sand making machine that is processed and produced, as well as the precautions for the running-in period of the sand making machine.

The running-in period of mechanical equipment is also called the running-in period, which generally refers to the process of contact, friction and biting of mechanical parts at the beginning of operation. During the running-in period, the ability of the various components of the lifting machinery to work with each other to adapt to the environment can be adjusted, and the uneven parts on the parts can be worn away. The running-in period of the sand making machine is very important, and it is a key point for the sand making machine to be able to operate normally in the later sand making operation.

The matters needing attention in the sanding machine include: Before operating the sand making machine, please carefully read the instructions and operation manual of the sand making machine equipped by the manufacturer, familiar with the equipment *; empty load operation and load operation, under normal conditions, empty load It can be operated for 4 hours. When the air load is running, check the flexibility of the lower pulley, whether the machine is installed firmly, whether there are other noises, etc. Check and adjust the loose parts in time to prevent the parts from being loosened. abrasion.

The user also needs to pay attention to the working load of the sanding machine during the running-in period. The working load should not exceed 80% of the rated working load during work. Arrange the appropriate workload to prevent the machine from heating due to excessive work. Pay attention to the running-in period. Lubrication of equipment, poor lubrication, will cause scratches and seizures of precision parts; we should always check the data of each instrument during running-in to see if there is any abnormality.