How to improve the sand output rate of sand making machine?

As a key equipment for producing artificial sand, sand making machine is widely used in engineering fields such as construction, highways, railways and water conservancy. The quality of sand making machine products has an important impact on the safety and durability of engineering construction, and the sand output rate of sand making machine is one of the important indicators directly related to its production efficiency and product quality. However, many times we will find that the output of sand making machine cannot achieve the expected effect, and even the problem of low output occurs. This article will deeply explore the reasons for the low output of sand making machine and propose corresponding solutions to help you improve the sand output rate of sand making machine.

Measures to improve the sand output rate of sand making machine

Material: The hardness, toughness, humidity, viscosity and other properties of the material will affect the output of the sand making machine. Different materials have different physical properties, so it is necessary to select the appropriate sand making machine model and parameter settings according to the characteristics of the material. At the same time, try to choose materials with moderate hardness for sand making to avoid affecting the normal operation of the sand making machine due to excessive or low hardness of the material.

Equipment: The internal structure, component material, lubrication system, etc. of the sand making machine will affect its output. In order to improve the sand production rate of the sand making machine, the following measures can be taken:

1. Regularly check the wear of internal components: The internal components of the sand making machine should be replaced in time after wear, otherwise it will delay production and affect the sand production efficiency of the sand making machine. At the same time, it is necessary to strengthen the maintenance and maintenance of the equipment, regularly check the operating status of the equipment and the wear of the components, and promptly discover and solve problems.

2. Regularly check the tightness of the motor V-belt: The sand production efficiency of the sand making machine is also affected by power transmission, and the main factor affecting power transmission is the tightness of the V-belt. Therefore, pay attention to the tightness of the power transmission belt, make daily adjustments, and ensure that it does not affect production efficiency.

3. Check the impeller speed: When the impeller speed of the sand making machine is too low, it will lead to insufficient throwing speed, insufficient collision or impact force between the material and the guard plate, and the sand production rate will be *ly reduced, so it is *ly important to ensure that the speed is within the normal range.

4. The sealing operation should be done well: the sealing parts of the sand making machine will gradually wear out after a long operation time. If the sand making machine is not adjusted for a long time, dust can easily enter the bearings or oil channels, making the lubrication of the sand making machine lose its effectiveness. In this way, the wear of the bearings will be accelerated and the life will be reduced, so the sealing condition must be maintained regularly.

5. Pay attention to strengthening the shock absorption work: Excessive vibration not only directly affects the operating status of the sand making machine and its components, but also reduces the service life of the sand making machine, so the shock absorption work must also be done well.

6. Operate according to the oil temperature warning: Because the oil temperature of the sand making machine is too high, it means that the bearing is seriously heated, so it is necessary to s* the machine in time for inspection, and continue production after troubleshooting.

Operation: Improper operation and lack of standardized operation will also affect the output of the sand making machine. In order to improve the sand production rate of the sand making machine, it is necessary to operate strictly in accordance with the equipment manual to avoid illegal operation and misoperation. At the same time, * training for operators to improve their skills and operation level will help improve the sand production rate of the sand making machine. Through training, operators can better understand the *, operation requirements and treatment methods of common problems of the equipment, so as to better operate and maintain the sand making machine, improve the sand production rate and ensure the normal operation of the equipment.

Design: The design of the sand making machine also has an important impact on its output. In order to improve the sand production rate of the sand making machine, the structural design of the sand making machine can be optimized to improve its crushing efficiency and passing capacity. At the same time, the applicable scope and market demand of the sand making machine should be considered, and the appropriate model and parameter setting should be selected according to the characteristics and needs of different materials.

In summary, the low output of the sand making machine may be caused by many reasons. In order to improve the sand production rate of the sand making machine, it is necessary to start from multiple aspects, including material selection, equipment maintenance, operation specifications, design optimization and other aspects. At the same time, it is also necessary to strengthen personnel training and other measures to improve the efficiency of the sand making machine.