Analysis of the Causes of the Fracture of the Jaw Crushing Maneuver

The common problem in the production of jaw crusher is the wear and break of the parts. This phenomenon is *ly caused by the core parts. The moving part is one of its core parts. When it is in production, there will be breakage. Let me introduce some of the conditions related to the fracture of the part.
First of all, what causes the breakage of the jaw crusher?

1, quality problems
Quality is the fundamental factor determining the service life of equipment or parts. If the quality of the jaw crusher itself is problematic, then when it is used, it will easily break due to the force, resulting in poor quality. The reasons are mainly the choice of materials and the processing technology;

2, operational problems
Jaw crusher has strict requirements on operation in use. If the staff is not familiar with the operation process, it is easy to cause failure in production due to improper operation. In addition, if this phenomenon is accompanied by installation imbalance or If the bolt is loose and the spindle speed is too fast, then the phenomenon that the moving jaw will swing too fast in the production will easily cause the breaking phenomenon of the moving jaw;

3, the problem of feeding
Feeding is an important part affecting the production of jaw crusher. The nature of the feed will affect the wear of the jaw. When the material properties exceed the processing capacity of the equipment for a long time, the wear of the jaws will increase, causing the breakage of the jaws. The phenomenon.