0086-371-67660555 Email:sales@zxcrusher.com
cone crusher nerws banner

position: Home > News > The Starting points of the jaw crusher

The Starting points of the jaw crusher

Time:2015-09-16 18:15:09 10:10:46 AM Num:84

The jaw crusher is generally installed on the concrete foundation. Because of the great quality of the crusher, the working condition is bad, and the machine is in operation. The vibration of the foundation of the vibration of the machine and the structure of the building. Therefore, the basis of the crusher must be separated from the plant foundation.

At the same time, in order to reduce the vibration, in the crusher foundation and the frame between the rubber or wood to do liner. In order to ensure the normal operation of the jaw crusher, and give full play to the production capacity of the equipment, we must pay attention to the correct operation of the crusher:

Jaw crusher The starting points of the jaw crusher: 1, must confirm the jaw crushing machine and no one around to work, to boot device; 2, after the start crusher machine, the first to observe the equipment operation is stable, voltage and current normal abnormal sound, the belt pulley and the flywheel no loosening phenomenon, to mine; 3, of jaw crusher to the ore must be uniform, flickering, resulting in small equipment load suddenly suddenly, causing belt slippage mine pressure; 4, every half hour observation jaw crushing machine voltage and current situation, there is no abnormal smell and spark phenomenon, check bearing temperature does not exceed 60 DEG C; 5, check the jaw type crushing machine bolts loosening, a frame, a motor foot bolt without loosening and rotating parts with or without noise.
 

Search


Contact us