Analysis of the reasons for sudden stop of cone crusher

In the crushing, grinding and sand production lines, there are many types of equipment required. The cone crusher is only one of them, and it is also an important one. Its role in the process is to crush or preliminary crush the stone. It is then used for fine crushing, grinding or sand making, and it has a wide range of applications.

In the process of the cone crusher, there may be many problems. Sometimes, in order to prevent the damage caused by the failure, it is necessary to s* the car for maintenance, but there is a situation where the equipment suddenly s*s. This situation is *ly Due to the failure of the machine, a * inspection is required. This article introduces the reasons for the sudden s* of the cone crusher.

One is the problems related to lubricating oil. For example, if the oil temperature is too high or the oil level is relatively low, it may lead to poor lubrication, which will cause mechanical heat generation, coupled with poor heat dissipation, resulting in mechanical The overall temperature is too high, so a sudden s* phenomenon.

The second is to check whether there is a poor contact at each power interface, because during the production process, if the power interface of the cone crusher has poor contact, it will cause problems in power supply transmission and it is easy to cause parking The phenomenon.

The third is that when the cone crusher is working, if a large piece of material is stuck inside the crushing chamber, the equipment will no long be able to continue to operate, which is also a reason for the sudden s*.